Download Print this page

OLT SpaceSaver SS124-SLIDER-PLY-AK Assembly Manual page 21

12x4 sliding doors - plywood roof - ak siding

Advertisement

50" wide x 5 3/4" deep.
31.
Position a Small Outside Plywood Roof Panel tight against the rear of the front plywood. Position
with same side overhang. Attach with 6 - 1 1/4" Screws as per Step 30.
32.
Locate Center and remaining Outside Roof Panels. Position Center Large Panel (45 1/2" wide) on
rafters and attach as per Steps 30 - 31. Place Small Center Roof Panel (45 1/2" wide) on rafters as per
Step 30.
33.
Complete alignment and attachment of Small Center Roof Panel as per Steps 30 - 31. Position and
attach remaining Outside Large and Small Plywood Panels. Position so plywood overhangs outside
rafter by 2". In the front, plywood will be recessed 1/8" back from rafter end. With panels positioned
correctly, attach to rafters with 9 - 1 1/4" Screws for the Large Panel and 6 - 1 1/4" Screws for the Small
Panel.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 21
tight
sales@outdoorlivingtoday.com

Advertisement

loading