Transport And Storage; Transporting The Hydrotrac Gft 8000 - Bosch REXROTH HYDROTRAC GFT 8000 Operating Instructions Manual

6 Transport and storage

Please read chapter 7.1 "Unpacking" before you transport the planetary
gearbox.

6.1 Transporting the HYDROTRAC GFT 8000

Hazardous, uncontrolled movements during the transport of the planetary
gearbox!
Mortal danger, risk of injury, severe physical injury or damage to property!
Observe the national laws and regulations regarding occupational safety and

health protection and transport.
Weight information about the planetary gearbox can be found in the shipping

documents, the technical data sheet or on the name plate.
Make sure that the planetary gearbox is attached to the crane or the forklift

exclusively by qualified personnel with credentials, using attachment means,
and is transported only by said qualified personnel, with a crane or forklift. In
addition, observe chapter 2.4 "Qualification of Personnel".
Adjust the lifting means (crane or forklift) and attachment means (chains and

shackles or straps or ropes) to the weight and the dimensions of the planetary
gearbox.
Design the load-carrying capacity of the lifting means to match the weight of

the planetary gearbox.
Tighten the means of attachment before lifting the planetary gearbox.

You may only lift the planetary gearbox with a forklift if it is protected by a

transport frame / a pallet designed for the planetary gearbox.
Make sure that the crane loads (such as the planetary gearbox on the crane

hook) do not start swaying.
Danger from suspended loads!
Danger to life or risk of injury!
Use a crane or forklift whose load-carrying capacity is sufficient to lift the

planetary gearbox.
Never step or put your hands under suspended loads.

RE 79022-01-B/04.2020, General Operating Instructions HYDROTRAC GFT 8000 series 40, Bosch Rexroth AG
Transport and storage
WARNING
23/70