Table of Contents
Advertisement
Locally hot surfaces on the gearbox!
Danger of burns!
Do not touch any hot surfaces on the planetary gearbox. The planetary gearbox
heats up to a max. of 90 °C during operation in the oil sump.
Allow the planetary gearbox and its mounting parts to cool down to approx.
50 °C before touching.
To protect yourself from burns, wear heat-resistant protective clothing and
heat-resistant safety gloves.
Hot lubricating oil during operation!
Danger of scalding during oil change, oil sampling and draining oil!
To protect yourself from scaldings, wear heat- and oil-resistant safety gloves
and heat-resistant protective clothing. Wear protective goggles.
Avoid oil temperatures of much more than 50°C when taking oil samples or
draining oil.
When taking the oil sample or draining the lubricating oil, carefully open the
oil sampling point or oil drain.
Sharp edges and tensioned tension belts and cable fasteners as well as
rebounding parts!
Risk of injury!
Carefully remove any attached tension belts and chains.
When cutting tension belts and detaching chains, always wear protective
goggles and cut-resistant safety gloves.
Danger in the case of mix-up with metrical and inch threads!
Risk of injury and damaging to the gearbox!
Only assemble the planetary gearbox, if you have the dimensioned drawing
available, indicating the thread types and sizes.
Danger in the case of faulty installation of cables and lines!
Risk of injury or property damage!
Lay cables and lines so that they cannot be damaged and no one can trip over
them.
Metal particles or metal abrasion in the lubricating oil or on screw plugs!
Risk of injury!
When refilling the lubricating oil, during the oil change and when draining oil,
always wear oil-resistant safety gloves and protective goggles.
RE 79022-01-B/04.2020, General Operating Instructions HYDROTRAC GFT 8000 series 40, Bosch Rexroth AG
Safety instructions
CAUTION
13/70
Advertisement
Table of Contents
