Table of Contents
Advertisement
c) Ventilation
Adequate ventilation is recommended at the place of installation. For example the
following guideline should be followed:
− In case of the area is more than 300 square meters (per unit), no ventilation is
required, provided the room is not completely air tight.
− In case of the area is less than 300 square meters, the torch is used in fixed
condition and the welding is continuously performed, adequate ventilation is
recommended with the help of vent fan or exhaust duct.
d) Installation Items
No. Items
1.
Remote control Unit RCU-SSR
400 / RCU SSR 600
2.
Work Piece
3.
Switch Box (Input)
4.
Connector for Remote Control Unit
5.
Negative terminal
6.
Positive Terminal
REMARKS:
While performing a ground work, it is recommended that a skilled electrician do the work.
No. Items
7.
Control Cable for RCU SSR-400 /
Control Cable for SSR 600
8.
Welding Cable
9.
Welding Cable
10.
Input Cable
11.
Electrode Holder
12.
Electrode
13.
Terminal Block input
5
Advertisement
Table of Contents
