Table of Contents
Advertisement
9. BEFORE FIRST USE
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Put a small quantity of detergent in
the compartment for washing phase.
4. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
9.1 Language setting
The display has a default language.
The first time you press the button
activate the appliance, the display tells
you to change the language setting.
1. Press
you prefer.
2. Press
If no language is set after several
seconds the appliance operates with the
default language. Until you don't set a
language, the display asks you to set a
language each time you activate
appliance.
9.2 Change the language after
the first activation
1. Press
some seconds to enter the language
setting
2. Press
you prefer.
10. DAILY USE
10.1 Using weight sensors
For a correct use of the
weight sensor, the drum
must be empty when
activating the appliance.
Set the programme
BEFORE you put the
laundry in the drum.
or
to set the language
to confirm the language.
and
at the same time for
or
to set the language
3. Press
9.3 Detergent quantity setting
The text bar also gives the indication
about the detergent quantity, when the
door is closed after the laundry load. By
default, the detergent quantity indication
is given as a percentage. 100% is the
maximum detergent quantity that you
can put in the compartment
detergent drawer.
You can set the indication as ml to have
more precision.
to
The display can give the indication for 2
types of detergent (powder or liquid):
1. Press
some seconds.
The message "Set dosage det 1" comes
on in the text bar.
2. Press
that agrees with 100%. For the
maximum detergent quantity see the
detergent container.
3. Press
The message "Set dosage det 2" comes
on in the text bar.
4. Press
that agrees with 100%. For the
maximum detergent quantity see the
detergent container.
5. Press
10.2 Activating the appliance
Press the
deactivate the appliance. A tune sounds
when the appliance is activated.
10.3 Setting a programme
1. Press one of the programme
touchpad to set the necessary
programme:
• The indicator
ENGLISH
to confirm the language.
of the
and
at the same time for
or
to set the data as ml
to confirm.
or
to set the data as ml
to confirm.
button to activate or
flashes.
15
Advertisement
Table of Contents
