Table of Contents
Advertisement
Preparing Recording Media
Initializing Recording Media
The first time you use a recording media with this camera, initialize it first. You
permanently delete all the data it contains.
50
Operating modes:
1 Open the [Initialize Media] submenu.
> [Æ ! Recording/Media Setup] > [Initialize Media]
2 Select [CFast], [SD Card A] or [SD Card B] and then press the joystick.
3 Select [OK] and then press the joystick.
4 When the confirmation message appears, press the joystick.
• The recording media is initialized and all the data it contains is erased.
IMPORTANT
• Initializing a recording media will permanently erase all data, including photos and protected custom picture
files. Lost data cannot be recovered. Make sure you save important recordings in advance.
• Depending on the SD card, initialization may take up to a few minutes.
NOTES
• While recording on an SD card, you can initialize another SD card in the other SD card slot.
• If you set an assignable button to [Initialize Media] (A 125), you can press the button to open the initialization
submenu.
Switching Between the SD Card Slots
The camera features two SD card slots, SD card slot A and SD
card slot B. If both slots contain an SD card, you can switch
between them as necessary.
Operating modes:
Press the SLOT SELECT button.
• The access indicator of the selected SD card slot will illuminate in
green. On the screen, the SD card selected is indicated with a Ð mark next to SD card icon.
NOTES
• If both SD card slots contain an SD card and you open the cover of the selected slot, the camera will
automatically switch to the other slot.
• You cannot use the SLOT SELECT button to switch between SD card slots while recording.
• You can also perform this function remotely using Browser Remote on a connected network device (A 170).
can also initialize a recording media to
Advertisement
Table of Contents
