Canon C200B Instruction Manual page 174

Browser Remote: Controlling the Camera from a Network Device
1 Live view screen
Shows the camera's live view image. When the live view image is not turned on, the camera ID and lens
information will appear here.
2 Status indicators
174
STBY, etc. :
`
STBY , REC
4
:
è
, etc. :
3 [LIVE VIEW] button
Touch the button to display the camera's live view image on the Browser Remote screen.
4 Clip marks and shot marks buttons
When recording, you can flag important frames in a clip by adding shot marks or tag important clips by
adding clip marks (A 108).
To add a shot mark: While recording a clip, touch [Shot Mark].
To add a clip mark: After recording a clip, touch [
a % mark to the clip.
NOTES
• Depending on the Wi-Fi connection's strength, there may be delay of 0.5 seconds or more between the
frame shown when you touch/click the button and the frame to which the camera adds the shot mark.
D
5 [ Touch Focus] button
Touch the button to unlock (enable) the touch focus mode.
6 Browser Remote screen selection ([Full] user only)
Touch [v] to open the main remote recording screen, [
open the basic screen for devices with a small screen (A 181).
7 Language selection
Most of the application's controls emulate physical buttons on the camera and appear in English only,
regardless of the language selected.
8 Key lock button
Touch the icon to lock the Browser Remote screens in order to prevent settings from being changed
inadvertently.
9 [REC] button
Touch the button to start recording. While recording, the center of the button turns red.
Touch the button again to stop recording.
10 Recording media selection and approximate remaining recording time
The currently selected recording media is indicated with a Ð mark next to the icon.
Remaining recording times are approximate and calculated based on the current video configuration used.
11 [SLOT SELECT] button
Touch the button to select the other SD card when both SD card slots contain a SD card.
: Wi-Fi connection indicator. While Browser Remote is correctly connected to the camera, the
dots will keep turning on and off in a loop.
Recording operation (same as on the camera, A 59).
`
: Output recording command (A 188).
Appears during double slot recording (A 51).
Remaining battery charge (A 60)
Mark] to add an $ mark to the clip, or [
] to open the metadata screen (A 179) or [ ] to
Mark] to add