Canon C200B Instruction Manual page 194

Menu Options
Menu item
%
1, 4
[LED]
[Tally Lamp (Front)],
194
[Tally Lamp (Rear)],
[CFast Access LED],
[SD Card Access LED],
[ (Ethernet)]
[Fan]
[Mode]
[Fan Speed (Always)]
[Touch Screen Response]
[Review Recording]
[GPS Auto Time]
&
1
[Retract Lens]
[Reset Hour Meter]
1
[Firmware]
[Camera]
[Lens]
1
mode only.
2
The default value depends on the country/region or purchase.
3
Appears on page # in
4
Appears on page $ in
5
Only when the LM-V1 LCD Monitor (supplied accessory for the C200; optional accessory for the C200B) is attached.
[¥ My Menu] (
Menu item
!
[CAMERA-1 Edit]
"
[CAMERA-2 Edit]
#
[CAMERA-3 Edit]
$
[CAMERA-4 Edit]
%
[CAMERA-5 Edit]
[On], [Off]
These settings determine whether the following LEDs and indicators will illuminate.
[Tally Lamp (Front)], [Tally Lamp (Rear)]: The tally lamps on the camera. Note that regardless of this
setting, when the camera is turned off, the tally lamps will illuminate in red momentarily after the
Q button is pressed.
[CFast Access LED], [SD Card Access LED]: The SD card access indicators and the CFast card access
indicator when the camera is accessing the respective recording media.
[ (Ethernet)]: The
[Automatic], [Always On]
[High], [Low]
5
[Normal], [Low]
[Entire Clip], [Last 4 sec]
[On], [Off]
[On], [Off]
When one of the following lenses is attached to the camera and the focus mode switch on the lens is
set to AF, if this setting is set to [On], the lens will retract fully when the camera is turned off.
• EF 40mm f/2.8 STM
1
–
The camera has two "hour meters" – the first keeps track of total operation time and the second
keeps track of operation time since the last time the second hour meter was reset with this function.
–
Displays the current firmware version of the camera. This setting is usually unavailable.
–
mode.
mode.
mode only)
[Register], [Move], [Delete], [Reset All], [Rename]
[Register], [Move], [Delete], [Reset All], [Rename]
[Register], [Move], [Delete], [Reset All], [Rename]
[Register], [Move], [Delete], [Reset All], [Rename]
[Register], [Move], [Delete], [Reset All], [Rename]
Setting options and additional information
(Ethernet) indicator when the camera is accessing a wired network.
• EF-S 24mm f/2.8 STM • EF 50mm f/1.8 STM
Setting options and additional information
(A 57)
(A 63)
(A 40)
(A 112)
(A 111)
(A 38)