4K Workflow Overview - Canon C200B Instruction Manual

4K Workflow Overview

4K Workflow Overview
The following illustrates the typical 4K workflow for this camera.
20 Operating modes:
SD card
2
2K recording
(MP4 or
XF-AVC)
1
For MP4 and XF-AVC recordings, the resolution is 3840x2160.
2
For proxy recordings, the resolution is 2048x1080.
Shoot in 4K mode (A 64).
You can record 4K RAW on a CFast card or 4K YCbCr 4:2:0 data on an SD card in the camera, or
record 4K data using an external 4K recorder connected to the camera's HDMI OUT terminal
(A 152).
In addition to the primary 4K recording to the CFast card, you can record simultaneously 2K proxy
clips on an SD card in the camera (A 113).
• When the proxy clip is XF-AVC format, the file names of the primary and proxy clips will be similar (A 61).
• When the primary clip is XF-AVC format, proxy clip recording is not available.
After recording on a CFast card, develop the CFast card data using the Cinema RAW Development
software (A 159) to generate full-quality data.
• You can also generate proxy data with the software.
Perform color grading based on the full-quality data.
Recording
1
4K recording
HDMI OUT
External 4K
terminal
recorder
4K recording
(XF-AVC)
SD card
4K recording
(RAW)
CFast card
Post-production
Full-quality
data
YCbCr 4:2:0
data
4K RAW
data
Cinema
RAW
Development
Proxy
data
Proxy data
RAW plugin
Full-quality
data
Full-quality
data
Color
grading
EDL
NLE software