Canon C200B Instruction Manual page 146

Clip Operations
Adding $ Marks or % Marks
You can add an OK mark ($) or check mark (%) to XF-AVC clips to help you identify particular clips for a future
purpose. Furthermore, you cannot delete clips with an $ mark so you can use this mark also to protect
important clips.
146
Operating modes:
Adding an $ Mark or % Mark during Playback
To add an OK mark ($) or check mark (%) to a clip during playback or playback pause, you must first set an
assignable button to [Add $ Mark] or [Add % Mark] in advance.
1 Set an assignable button to [Add $ Mark] or [Add % Mark] (A 125).
• To add both types of clip marks (to different clips), set one assignable button to [Add $ Mark] and another
assignable button to [Add % Mark].
2 Open the [XF-AVC] index screen and select the desired clip.
3 During playback or playback pause, press the assignable button to add the clip mark.
• A message indicating the clip mark will appear and the selected clip mark will be added to the clip.
• Adding a clip mark to a clip during playback will pause the playback.
Adding an $ Mark or % Mark from the Index Screen
1 Open the [XF-AVC] index screen, select the desired clip and then press the joystick to open the clip menu.
2 Select [Add $ Mark] or [Add % Mark] and then press the joystick.
• The clip information screen appears and it prompts you to confirm the operation.
3 Select [OK] and then press the joystick.
• The screen changes back to the clip index screen and an $ mark or % mark appears next to the selected
clip's thumbnail.
• Select [Cancel] instead to cancel the operation.
NOTES
• A clip cannot have both an $ mark and % mark at the same time. When you add a % mark to a clip with an
$ mark, the $ mark will be deleted. Similarly, when you add an $ mark to a clip with a % mark, the %
mark will be deleted.
Deleting an $ Mark or % Mark from a Clip
Operating modes:
1 Open the [XF-AVC] index screen, select the desired clip and then press the joystick to open the clip menu.
2 Select [Delete $ Mark] or [Delete % Mark] and then press the joystick.
• The clip information screen appears and it prompts you to confirm the operation.
3 Select [OK] and then press the joystick.
• The screen changes back to the clip index screen and the selected mark is deleted.
• Select [Cancel] instead to cancel the operation.