Canon C200B Instruction Manual page 30

Preparing the Handle Unit and LCD Monitor
5 Attach the LCD monitor.
• Use the socket for 1/4"-20 screws on the bottom of
the LCD monitor.
• Use the hex wrench to secure it firmly with the hex
30
socket head bolt.
6 Rotate LCD attachment unit pivot A 180° toward the SD
card slots and then rotate pivot B 90° toward the lens
( ).
7 Using a UN-5 Unit Cable
terminal to the LCD monitor's VIDEO terminal ( ).
2
Supplied accessory for the C200; optional accessory for the
C200B.
• Align the Í marks on the cables' plugs and
terminals.
Removing the LCD Monitor and LCD Attachment
Unit
1 Set the Q switch to OFF.
2 Disconnect the unit cable from the camera's and monitor's
VIDEO terminal ( ).
• Pull back the metallic tip of the plug and then disconnect
the cable from the terminal.
3 Unscrew the LCD attachment lock screw and then remove
the LCD attachment unit and monitor ( ).
IMPORTANT
• Be careful not to drop the camera when attaching or
removing the LCD monitor.
2
, connect the camera's VIDEO