Summary of Contents for National Instruments NI PXI-6683 Series
Page 1
This guide contains instructions for installing your NI PXI-6683 or NI PXI-6683H module and NI-Sync software. What You Need to Get Started To set up and use the NI PXI-6683 Series, you need the following items: NI PXI-6683 Series Timing and Synchronization Module ...
Page 2
The following are general installation instructions. Consult the chassis user manual or technical reference manual for specific instructions and warnings about installing new modules. Power off and unplug the chassis. Do not install the NI PXI-6683 Series module in the system controller slot Caution (slot 1) of a chassis.
Page 3
The NI PXI-6683 Series module is now installed. Verifying the Installation During the first boot following the software and hardware installation of the NI PXI-6683 Series module, the OS detects the device and associates it with the NI-Sync driver software.