Table of Contents
Advertisement
Hold the bar nose up and turn the adjuster clockwise until the chain fits snugly against
the underside of the bar.
A: Proper tension
B: Improper tension
Tighten the nut with the bar nose held up.
Pull the chain around the bar by hand.
Loosen the adjustment if you feel tight spots.
Checking lifting hook
IMPORTANT
If your chain saw falls from height or receives a strong impact to the lifting hook
(harness ring), please check its integrity by opening the air cleaner cover (see page 31
"Air filter") to assess that the ring and its associated parts are not damaged or broken.
In case of being damaged or broken, do not continue using the unit with the lifting hook
(harness ring).
If you have any doubt with regards to their condition, have the unit checked out by your
nearest authorized dealer.
1. Air cleaner cover
2. Lifting hook (harness ring)
ENGLISH
32
Advertisement
Table of Contents
