Terminal (X1M) Removal - Daikin D2CND028A1AA Servicing Manual

4.11.1 Daikin Eye and Push Button Removal
•
Isolate the appliance from power supply and closedown
the gas valve.
•
Open the appliance (refer to Section 4.2).
•
Take out the PCB (refer to Section 4.10).
•
Unscrew the 3 screws that connect PCB and control
panel(5).
•
Remove the buttons from back of the control panel (6).
•
Remove Daikin eye's 2 screws (7).
•
Disconnect Daikin eye's wire connector (8).
(5)
D2CND028A1AA + D2CND028A4AA + D2CND035A1AA +
D2CND035A4AA + D2TND028A4AA + D2TND035A4AA
Wall-mounted condensing boiler
ESIE17 - 09 / 2017.11
4.11.2 Terminal (X1M) Removal
•
Isolate the appliance from power supply and closedown
the gas valve.
•
Open the appliance (refer to Section 4.2).
•
Remove the control panel back cover (refer to Section
4.10)
•
Disconnect the terminal's (X1M) wire connector ( refer to
Section 4.3).
•
Undo the screws that connect the terminal (X1M) and
control panel (9).
(6)
• Re-assemble in reverse order.
4 Part replacement
(7)
(8)
(9)
Servicing manual
21