Pride BAJA BANDIT Owner's Manual page 22

V. C O M F O R T A D J U S T M E N T S
SEAT SUSPENSION
EQUIPPED)
The seat post acts as a shock absorber and can be
adjusted for diff erent degrees of ride comfort. The
spring included in your vehicle is confi gured to work at
the maximum weight capacity of the vehicle. Located
in your Owner's Package is a lighter secondary weight
spring for those customers who are lighter in weight, or
prefer a softer ride.
NOTE: Installing the lighter secondary weight spring
may result in the seat suspension becoming ineff ective
if the user's weight is on the upper end of the spring
tolerance. If the lighter secondary weight spring is
used and the seat suspension doesn't feel eff ective,
then the standard spring should then be used.
To make seat post ride adjustments:
1. Remove the seat from the vehicle.
2. Remove the upper seat post from the vehicle by
removing the shoulder bolt from the lower portion
of the seat post, then lifting the post straight up and
off the vehicle. See fi gure 14.
3. Remove the standard spring.
4. Insert the lighter secondary weight spring.
5. Reinstall the upper seat post.
6. Reinstall the shoulder bolt.
7. Reinstall the seat.
NOTE: Do not install the seat post in the upper hole
with the suspension seat. See fi gure 14. Doing so will
make the suspension seat post inoperable.
22
ADJUSTMENT (IF
IDENTIFICATION KEY
1. Rubber Boot
2. Setscrew
3. Ratchet Insertion Point
Figure 14. Seat Suspension Adjustment
1
2
3
®
Mobility BA140
BAJA