Pride BAJA BANDIT Owner's Manual page 25

V I . D I S A S S E M B LY A N D A S S E M B LY
FRAME SEPARATION
To separate frame:
1. With the seat and battery pack removed (see Disassembly Procedures on previous page), lower the tiller and
tighten the tiller adjustment knob. See fi gure 11.
2. Lift up on the frame release lever, and pivot the rear section backwards, until the frame hooks are no longer
resting on the lower frame tube.
3. Slowly separate the two sections of the vehicle. See fi gure 19.
Figure 19. Frame Release Lever (Style A)
ASSEMBLY
To assemble your vehicle:
1. Use the frame release lever to lift the front section as you align the frame hooks of the front section with the
lower frame tube of the rear section. See fi gure 19.
2. Once the frame hooks are over the lower frame tube, lower the front section and pivot the rear section
simultaneously. This will engage the frame lock-up automatically. See fi gure 19.
3. Raise the tiller and fully tighten the tiller adjustment knob. See fi gure 11.
4. Reinstall the battery pack(s).
5. Reinstall the seat and rotate it until it is secured into place.
6. Unlock the tiller by turning the tiller lock knob 90° counterclockwise. See fi gure 18.
WARNING! After assembly, make absolutely certain the tiller lock knob is in the unlocked
position before riding your vehicle.
®
Mobility BA140
BAJA
IDENTIFICATION KEY
1. Frame Hook
2. Lower Frame Tube
25