Table of Contents
Advertisement
E-Drive Battery Removal/Replacement
To Remove:
Open the battery housing lid back to expose the (2) 82V Batteries, refer to Figure A and Figure B. The batteries can
then be removed by hand. The charge level of the batteries can be checked by pressing the battery check level, see
Figure C.
To Replace:
After fully charging your 82V Batteries, open the battery housing lid of the Powerhead to expose the battery bay.
Check the position of the battery before installing to make sure it'll seat properly in place and then install the battery.
Refer to Figure A & Figure B.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Figure B
Figure C
31
Advertisement
Table of Contents
