Figure 15
1. Toolbar link
2. Pedal lever assembly
3. Lever assembly
4.
Install the post on the other end of the pedal
lever assembly through the top of the lever
assembly, and secure it using a washer (7/8
inch) and a retaining ring
5.
With the lift pedal assembly knee bent upwards,
install the square hole on the pivot tab to the
end of the toolbar link using a carriage bolt (3/8
x 1-1/4 inches), a spacer, a washer (1 inch), a
washer (13/16 inch), and a locknut (3/8 inch) as
shown in
Figure
16.
g345310
4. Retaining ring
5. Washer (7/8 inch)
(Figure
15).
1. Pivot tab
2. Toolbar link
3. Carriage bolt (3/8 x 1-1/4
inches)
4. Spacer
6.
Install the eccentric bolt through the bottom of
the pivot tab and the pivot bracket, and secure it
using a locknut (5/16 inch) as shown in
17.
1. Eccentric bolt
2. Pivot tab
9
Figure 16
5. Washer (1 inch)
6. Washer (13/16 inch)
7. Locknut (3/8 inch)
Figure 17
3. Pivot bracket
4. Locknut (5/16 inch)
g004105
Figure
g004106