Flashing Beacon Kit
CT, LT, and LT-F Series Triple Turf Mower or Groundsmaster
3400 Traction Unit
Model No. 02920—Serial No. 400000000 and Up
This product contains a chemical or chemicals known to the State of California to
Important: Do not install the flashing beacon kit on machines with a cab.
Preparing to Install the
Flashing Beacon Kit
Preparing the Machine
1. Park the machine on a level surface.
2. Lower the mower deck, reel cutting unit, or flail cutting
unit to the ground.
3. Engage the parking brake.
4. Shut off the engine remove the key.
5. Wait for all moving parts to stop.
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
WARNING
CALIFORNIA
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
Register at www.Toro.com.
Opening the Hood
1. Insert the hood key into the lock for the hood and
rotate the lock 90° counterclockwise
2).
2. Release the hood latches.
•
For machines with a top mounted hood latch:
press the button of the hood latch
•
For machines with a side mounted hood
latches: remove the 2 hood latches from the latch
catches
(Figure
Original Instructions (EN)
All Rights Reserved *3410-585* A
Printed in the UK
Form No. 3410-585 Rev A
Installation Instructions
(Figure 1 orFigure
(Figure
Figure 1
2).
®
1).
g189331