Solid-State Drive; Removing The Solid-State Drive - Dell Latitude 9440 2-in-1 Service Manual

Steps
1. Connect the battery cable to the connector on the system board.
2. Align and place the base cover on the palm-rest assembly, and snap the base cover into place.
3. Tighten the six captive screws to secure the base cover to the system.
Next steps
1. Install the SIM card tray.
2. Follow the procedure in

Solid-state drive

Removing the solid-state drive

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the base cover.
After working inside your
Before working inside your
computer.
computer.
Before working inside your
Removing and installing components 15