Removing The Right Speaker; Installing The Right Speaker - Dell Latitude 9440 2-in-1 Service Manual

Removing the right speaker

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the base cover.
3. Remove the WWAN card
4. Remove the battery.
About this task
The following images indicate the location of the right speaker and provide a visual representation of the removal procedure.
Steps
1. Peel the tape that secures the right speaker cable to the chassis.
2. Disconnect the right speaker cable from connector on the system board.
3. Remove the two (M1.6x1.8) screws that secure the right speaker in place.
4. Peel the tape that secures the right speaker to the chassis.
5. Lift the right speaker off the chassis.

Installing the right speaker

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
Before working inside your
if applicable.
computer.
Removing and installing components
Before working inside your
37