4. Follow the procedure in
Wireless Local Area Network (WLAN) Antenna module
Removing the WLAN antenna module
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
base
cover.
3. Remove the
WWAN card
4. Remove the battery.
About this task
The following images indicate the location of the WLAN antenna module and provide a visual representation of the removal
procedure.
Steps
1. Peel off the piece of tape that secures the WLAN antenna module to the palm-rest assembly.
2. Remove the two (M1.6x3) screws that secure the WLAN antenna module to the palm-rest assembly.
3. Lift and remove the WLAN antenna module off the system.
Installing the WLAN antenna module
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
After working inside your
Before working inside your
if applicable.
computer.
computer.
Before working inside your
Removing and installing components
39