Table of Contents
Advertisement
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Solid-state drive
WWAN card
Right fan
Left fan
Display cable/ Left Type-C
bracket
Right Type-C bracket
Display assembly
Heat sink
Battery
Right speaker
Left speaker
Screw type
Captive screws
M1.2x1.5
Captive screw
M1.6x3
M1.6x3
M1.6x3
M1.6x3
M2.5x4
Captive screws
M2x3
M1.6x1.8
M1.6x1.8
Quantity
6
1
1
2
2
2
3
6
3
6
2
2
Removing and installing components
Image
53
Advertisement
Table of Contents
