Table of Contents
Advertisement
General Safety Warnings (continued)
3. compressor Pump use and care
a. Disconnect the plug of the compressor
motor from the power source before
installing, making any adjustments, changing
accessories, or storing the compressor
Pump. Such preventive safety measures
reduce the risk of starting the unit accidentally.
b. Store an idle compressor pump out of the
reach of children and do not allow persons
unfamiliar with the compressor pump or these
instructions to operate it. A compressor pump
is dangerous in the hands of untrained users.
c. Maintain the compressor Pump. Keep the
compressor Pump clean for better and
safer performance. Follow instructions
for lubricating and changing accessories.
Keep dry, clean and free from oil and grease.
compressor Pump Safety Warnings
1. ONLy a qualified engineer with appropriate
certifications may attempt designing a new
compressor to ensure that all required safety
and control elements are in place and will work
together properly and safely. This compressor
pump is intended ONLy as a replacement
for a similarly rated pump on an existing
compressor that includes all other needed
components. constructing a new compressor
using this pump is not covered by this manual.
2. Use Safety Guard for Pulleys. The Air
Compressor Pump Pulley (58), V-belts (not
included), and motor pulley (not included) must
be covered by a safety guard (not included)
covering all moving elements before operation.
3. Before first and every use, verify
Pump has sufficient oil.
4. The use of accessories or attachments not
recommended by the manufacturer may
result in a risk of injury to persons.
5. Misalignment between Motor and Pump
can damage the Pump Pulley. Use a
straight edge, such as a yardstick, to check
and adjust alignment as needed.
6. Use proper size motor and motor pulley.
This Air Compressor Pump must be installed
with a 5 HP electric motor and pulley (both not
included) which can turn the Air Compressor
Pump Pulley at approximately 1050 rpm.
Item 67698
For technical questions, please call 1-888-866-5797.
check for misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the compressor's
operation. If damaged, have the compressor
repaired before use. Many accidents are caused
by a poorly maintained compressor pump.
d. Use the compressor Pump in accordance
with these instructions, taking into account
the working conditions and the work to be
performed. Use of the Compressor Pump
for operations different from those intended
could result in a hazardous situation.
4. Service
a. Have the compressor Pump serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the Compressor Pump is maintained.
7. Install motor, pulley belts and pulley belt
cover securely. Be sure to use the proper size
bolts to install the motor (not included). The belts
and belt cover (not included) must be strong
enough to prevent breaking and possible injury.
8. Be sure all equipment is rated to the
appropriate capacity of this pump. Make sure
that the lowest rated piece of equipment being
used can handle the maximum pressure of the
Air Compressor Pump (see Specifications).
9. Do not direct the air stream at
any person or animal.
10. Avoid burns. The Cylinders (22), Cylinder
Heads (6) and Air Outlet components become
very hot during operation. Do not touch.
11. Industrial applications must follow OSHA guidelines.
12. Maintain labels and nameplates on the
Compressor Pump. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
13. This product is not a toy.
Keep it out of reach of children.
14. WARNING: The brass components of this product
contain lead, a chemical known to the State
of California to cause cancer and birth defects
or other reproductive harm. (California Health
& Safety Code § 25249.5, et seq.)
Page 3
Advertisement
Table of Contents
