Install The Frame; Clean The Glass; Replace The Ambient Light Bulb When Broken - Bellfires Smart Bell 80 MF Installation And Maintenance Manual

5.2.4

Install the frame

1.
2.
3.
5.2.5

Clean the glass

1.
2.
5.2.6

Replace the ambient light bulb when broken

1.
2.
3.
4.
5.
6.
7.
8.
Smart Bell 80-60
Push the frame on the appliance.
Tighten the 3 hexagonal bolts on the
inside of the top frame and the 2
Hexagonal bolts at the bottom left
and bottom right (A) respectively.
Make sure that the frame connects
well to the wall.
Clean the glass with a soft cloth, a sponge or paper. Use glass cleaner or ceramic
hob cleaner.
Make sure that the glass is dry. Water droplets can leave a mark on the glass.
Turn off the power supply to the appliance.
Remove the content from the burner bed.
Remove the grate.
Carefully unscrew the broken light
bulb from the ceramic fitting.
Carefully turn the new light bulb in
the ceramic fittings.
Caution:
• Turn the ambient light
bulbs completely into
the ceramic fitting!
• Use only the Bellfires
ambient light bulb.
Prepare the appliance for use. Refer to
Turn on the power supply to the appliance.
Make sure that the ambient lighting operates correctly. Refer to
4.3
.
Maintenance
4.3.1
.
29