Specifications - Toro 04540 Operator's Manual

1
Figure 23
1. Seat adjusting lever
Note: Before lifting the seat, slide it to the furthest back
position and move the steering arm fully forward.
Fuel Shut-Off Valve
Close the fuel shut-off valve (Figure 24), behind the seat
and under the fuel tank, when storing or transporting
the machine on a truck or trailer.
Figure 24
1. Fuel shut-off (under the fuel tank)
g014628
1
g01462 6
23
Cutting Unit Power Disconnect
Couplers
Before installing, removing, or working on the cutting
units, disconnect the cutting units from the power supply
by separating the cutting unit power disconnect couplers
(Figure 25), located as the base of the rollover bar on
the left side of the traction unit. Connect the couplers
together before operating the machine.
Figure 25
1. Cutting unit power disconnect couplers
CAUTION
If you do not disconnect the power to the cutting
units, someone could accidentally start the cutting
unit, causing serious injury to hands and feet.
Always separate the cutting unit power disconnect
couplers before working on the cutting units.

Specifications

Note: Specifications and design are subject to change
without notice.
Width of cut
Wheel tread
Wheel base
Overall length (w/baskets)
Overall width
Overall height
Net Weight w/reels (11 Blade)
59.5 inches (151 cm)
50.5 inches (128 cm)
48.6 inches (123 cm)
98.0 inches (249 cm)
70.62 inches (179 cm)
80.83 inches (205 cm)
Refer to the traction unit
serial tag (Figure 1).