3.2 Accessing the System
The AS -1115S-FWTRT/AS -1115S-FDWTRT features a removable top cover, which allows
easy access to the inside of the chassis.
Removing the Top Cover
1. Remove one screw and loosen the thumbscrew that holds the top cover in place.
2. Slide the top cover towards the back, then lift the top cover up.
Check that all ventilation openings on the top cover and the top of the chassis are clear and
unobstructed.
Caution: Except for short periods of time, do not operate the server without the cover in place.
The chassis cover must be in place to allow for proper airflow and to prevent overheating.
Chapter 3: Maintenance and Component Installation
screw
Figure 3-1. Removing the Chassis Cover
27
thumbscrew