Table of Contents
Advertisement
Use in safety instrumented systems
18
Set write protection = Enter the locking code again (SIL: 7452). Check the locking
8.
status after performing SIL locking.
Navigate to: Setup → Advanced setup
Locking status = SIL locked must be confirmed by selecting "".
As an option, hardware locking can also be activated (via the dip switch marked
9.
"WP" on the main electronics).
Proserve NMS80
Endress+Hauser
Advertisement
Table of Contents
Need help?
Do you have a question about the Proserve NMS80 and is the answer not in the manual?
Questions and answers