Table of Contents
Advertisement
QB-RL78G1C In-Circuit Emulator
As an oscillator
specifications.
- Supply voltage: 5.0 V
- Output level: CMOS
Note An oscillation circuit that uses a resonator cannot be used.
Remark Insert the oscillator into the socket, take care for the pin 1 position.
R20UT2079EJ0100 Rev.1.00
2013.07.12
Figure 2-4. Acrylic Board Removal Method
Note
to be mounted in the OSC1 socket in the emulator, use the one that satisfies the following
Figure 2-5. Oscillator Shape
Top View
Figure 2-6. Mapping of Oscillator to Socket
CHAPTER 2 SETUP PROCEDURE
Page 24 of 45
Advertisement
Table of Contents
