Renesas QB-RL78G1C User Manual page 23

QB-RL78G1C In-Circuit Emulator
(c) When the oscillator (OSC1) mounted onto the emulator is used
Mount an oscillator in the OSC1 socket in the emulator and then select the "Clock socket" in the debugger.
The clock generated from the oscillator mounted on the emulator is used.
The selectable frequencies are same as those of the target device.
To modify the clock setting, the acrylic board on the bottom of the QB-RL78G1C must be removed.
The acrylic board can be removed by lifting it up.
For debugger settings, check the user's manual for the debugger that will be used.
R20UT2079EJ0100 Rev.1.00
2013.07.12
CHAPTER 2 SETUP PROCEDURE
Page 23 of 45