Connection Table - Hayward OmniPL Retrofit Kit Installation Manual

Connection Table

During configuration, the OmniPL will identify the pool equipment using the Connection ID shown on
the table below. You'll be prompted to provide which pool equipment is connected to each Connec-
tion ID. Because the control was previously wired, take this time to go through each connection and
fill out the table. Refer to the graphic below for the physical location of these connections.
ID
When using Optional Smart Relays
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
HVR1 HVR2 HVR3 HVR4
HVR5 HVR6 HVR7 HVR8
14