SRC BMW R1250 GS Mounting Instructions page 4

This drawing view shows the Mounted condition
of the Bracket LH and Bracket RH, with the
Mounting Pin.
The Final Mounted condition of Head Light Guard
is shown in the drawing.
Copyright By SRC
Design and Specification are subjected to change
Step 4:
Orient the Head Light Guard (1), as shown.
Assemble the Grommet (5) – 4 off, hugging and
flush, with the outer surfaces of the Head Light
Guard and holding on to the Mounting Pins,
projecting out of the Bracket RH & Bracket LH
Page 4