Advertisement
MANUAL
SETTLER WITH A HEATING JACKET
(DECRYSTALLIZATION MACHINE)
refers to:
4043A, 4043D, 4043C, 4043E, 4043B
Przedsiębiorstwo Pszczelarskie Tomasz Łysoń
Spółka z o.o. Spółka Komandytowa
34-125 Sułkowice, ul. Racławicka 162, Polska
www.lyson.com.pl, email; lyson@lyson.com.pl
tel. 33/875-99-40, 33/870-64-02
Siedziba Firmy Klecza Dolna 148, 34-124 Klecza Górna
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LYSON 4043A
Summary of Contents for LYSON 4043A
- Page 1 MANUAL SETTLER WITH A HEATING JACKET (DECRYSTALLIZATION MACHINE) refers to: 4043A, 4043D, 4043C, 4043E, 4043B Przedsiębiorstwo Pszczelarskie Tomasz Łysoń Spółka z o.o. Spółka Komandytowa 34-125 Sułkowice, ul. Racławicka 162, Polska www.lyson.com.pl, email; lyson@lyson.com.pl tel. 33/875-99-40, 33/870-64-02 Siedziba Firmy Klecza Dolna 148, 34-124 Klecza Górna...
-
Page 2: Electric Safety
IMPORTANT! Prior to operating the device please refer to the manual and act according to the guidelines contained therein. The manufacturer cannot be held accountable for the damages cause by misusing the device or its improper handling. NOTE! It is forbidden to pull the power supply cable. Keep the supply cable away from heat sources, sharp edges and its good technical state must be taken care of. -
Page 3: Setting Up The Controller
Setting up the controller loner time. The display shows maximum value of preset temperature that can be set . Readings L … are specified in 1. Prior to plugging in the device to the mains, one must 4 – button „-„ value decreasing make sure that the controller is switched off. -
Page 4: Error Description
“ON/OFF” button is pressed shortly. Longer pressing and therefore necessary to disconnect power supply, remove the holding of the button and subsequent releasing of the button will error source and controller reconnection activate the calibration mode, signalled by the (CAL) notice. In ERROR ERROR DESCRIPTION this mode by means of “+”... - Page 5 A receipt or a VAT invoice is issued for each product Power supply of dedicated feeder: purchased. Detailed guarantee terms and conditions, see Measurement input for PT1000 www.lyson.com.pl temperature measurement Outlet type: Relay, contact NO Output load: AC1 - 9A 230V...
Need help?
Do you have a question about the 4043A and is the answer not in the manual?
Questions and answers