Table of Contents
Advertisement
Features
16×10/100Mbps Auto-negotiation Ethernet ports
All ports support auto-MDIX, so there is no need to
use cross-over cables or an up-link port
Full/half duplex transfer mode for each port
Wire speed reception and transmission
Store-and-Forward switching scheme capability to
support rate adaptation and ensure data integrity
Broadcast storm protection
Up to 4K unicast addresses entries per device, self-
learning, and table aging
512KB RAM data buffer
Supports IEEE 802.3x flow control for full-duplex
mode ports
Supports Back-pressure flow control for half-duplex
mode ports
Optional one port 100BASE-FX multimode Fiber
module with SC type connector in the rear panel
Supports Port-based VLAN and IEEE 802.1p QoS
RS-232 DCE console port for setting up and manage
the Switch via connection to a console terminal or
PC using a terminal emulation program
Standard 19" Rack-mount size
6
Advertisement
Table of Contents
