Table of Contents
Advertisement
Control, and QoS. Link Status is determined by the Switch and
can't be changed. This screen displays Port 01 ~ 12 status, for
port 13 ~ 17, please select Next.
After completing the setup, move cursor to Save and hit Enter to
save the settings.
Figure 13. Port Configuration
(1) Speed
There are five speed modes— Auto, 100M Full, 100M Half,
10M Full, and 10M Half. To change the speed setting, highlight
Port, enter the port number and hit Enter, and the cursor will
move to the next field Speed. Hit Space Bar to select one of the
speed options. Hit Enter to select the desired speed and the
cursor will move to Flow Control option.
(2) Flow Control
This setting determines whether or not the Switch will be
handling flow control. To change the flow control setting, select
the Port number, highlight the FlowCtrl field, and hit Space Bar
19
Advertisement
Table of Contents
