Table of Contents
Advertisement
Note: Configuring VLAN can be very confusing. If your VLAN
settings do not perform the way they should, you can reset the
Switch back to its default state by going to "System" menu and
select "Factory Reset".
Configuring System Setting
The System configuration menu screen (see Figure 17) indicates
the following options:
Factory Reset: Restore all settings back to factory default.
Change Password: To change the login password (maximum 20
digits / letters).
Confirm Password: To confirm the new password.
Refresh Time: To set the automatic status refreshing time. You
can select Disabled, 1 sec., 5 sec., 10 sec., 15 sec., or 20 sec. (by
pressing the [Space bar]).
Login Timeout: Set the console idle time-out to automatically
logout the configuration console. The selections are Disabled, 1
min., 2 min., 3 min., 4 min., and 5 min.
System Uptime: Indicates how long the Switch has been
powered ON.
23
Advertisement
Table of Contents
