Table of Contents
Advertisement
Chapter 4
Operating within the SNMP environment
The TE-100/S14 Switch operates easily with other Bridges
within a network managed by the SNMP network management
protocol, although, it does not appear as a manageable SNMP
agent from a SNMP management terminal. Make sure that the
STA is enabled to avoid network looping or possible blocking of
forwarding paths.
The Out-of-Band Management facility enables a user to examine
the status of the Switch and the LAN ports as the Switch interacts
with other Bridges in the network.
STA is a complex subject. Therefore, it is best to keep the default
settings as set in the factory. The factory default setting should
cover the majority of installations. Table Chapter
the user changeable parameters in the TE-100/S14 Switch, and the
effect of changing them. Appendix B shows the default settings
and ranges of these parameters.
Operating without the SNMP environment
In a simple network installation where there is a network
hierarchy without any possibility of network looping, you may
turn off the STA in the TE-100/S14 Switch at the Bridge level
1
Please see footnote at page 25 for the Bridge definition.
2
Please see "Bridge level" at page 25.
Network Management
31
1
4 -1
shows
2
.
Advertisement
Table of Contents
