Table of Contents
Advertisement
26
en | Cant the Camera
Figure 10.3: Canting in progress
4.
Figure 10.4: Camera in canted position; arrows point to pan body fixing screws (1) and security screws (2)
Warning!
Do not stand the canted (45°) MIC Series 550 / MIC Series 550 IR camera upright (on the
!
camera base or, if mounted to a DCA, with the DCA base upright)! It is unstable unless
properly mounted.
2014.11 | 3.2 | F.01U.239.454
Align the two (2) pan body fixing screws, then carefully replace and tighten them. The
camera is now ready to be installed and configured.
Operation Manual
MIC Series 550
Bosch Security Systems, Inc.
Advertisement
Table of Contents
