Table of Contents
Advertisement
Available languages
Available languages
After having set the desired addresses and pressed ENTER, you can now choose a DMX Channel Mode.
(3 CH, 5 CH, 12 CH, 15CH).
Set the desired mode via the UP or DOWN buttons.
Press the ENTER button again to confirm and to exit the DMX Mode.
Please see the following DMX protocol graphic for the respective channel values.
Please, be sure that you don't have any overlapping channels in order to control each Audience Blinder
4x60W LED COB RGB correctly and independently from any other fixture on the DMX-chain. If several
Audience Blinder 4x60W LED COB RGB are addressed similarly, they will work synchronically.
If you set in the 15 channel mode, for example, the address to channel 16, the device will use the channel 16
to 30 for control.
Controlling:
After having addressed the Audience Blinder 4x60W LED COB RGB , you may now start operating it via
your lighting controller.
Note: It's necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order
to ensure proper transmission on the DMX data link.
DMX-Protocol
3-channel mode:
All 4 spots as one unit
Channel:
Value:
1
000 – 255
Channel:
Value:
2
000 – 255
Channel:
Value:
3
000 – 255
5-channel mode: All
Channel:
Value:
1
000 – 255
Channel:
Value:
2
000 – 255
Channel:
Value:
3
000 – 255
Channel:
Value:
4
000 – 255
Channel:
Value:
000 – 000
001 – 005
5
006 – 010
011 – 255
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
4 spots as one unit
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
Function:
Dimmer (0 – 100%)
Function:
No function
Sound Control (7 colors)
No function
Strobe (increasing)
25/28
00072234.DOC, Version 1.0
Advertisement
Table of Contents
