Setup - Toro Groundsmaster 3500-D Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
Media and Additional Parts
Description
Operator's Manual
Engine owner's manual
Declaration of Conformity
Ignition keys
Note:
Determine the left and right sides of the machine from the normal operating position.
Description
No parts required
Inclinometer
Decal (121-3598)
Hood-latch bracket
Rivet
Washer
Screw (1/4 x 2 inches)
Locknut (1/4 inch)
Exhaust guard
Self-tapping screw
No parts required
No parts required
No parts required
No parts required
No parts required
Qty.
–
1
1
1
2
1
1
1
1
4
–
–
–
–
–
Qty.
1 Review it before operating the machine.
1 Use it to reference engine information.
1
2 Start the engine.
10
Use
Activate, charge, and connect the
battery.
Check the angle indicator.
Install the CE decals (if required).
Install the hood latch (CE machines
only).
Install the exhaust guard (CE only).
Adjust the lift arms.
Adjust the carrier frame.
Adjust the height of cut.
Adjust the roller scraper (optional).
Install the mulching baffle (optional).
Use