Page 1
Marco Beverage Systems Ltd. INSTRUCTIONS FOR MODELS ECOBOILER T5 (P/N: 1000660 and 1000660MJ) ECOBOILER T10 (P/N: 1000661 and 1000661MJ) ECOBOILER PB5 (P/N: 1000665 and 1000665MJ) ECOBOILER PB10 (P/N: 1000666 and 1000666MJ) Water pressure : 5 - 50 psi (min.-max.)35 - 345 kPa (min.-max.)
Page 2
Marco Beverage Systems Limited. Marco Beverage Systems Limited. 63d Heather Road, Shire House, Strixton Manor, Sandyford Industrial Estate, Strixton, Wellingborough, Northants, Dublin 18. NN29 7PA Ireland Tel: +353 (0)1 295 2674 UK Tel: +44 (0)2072 744 577 Ireland Fax: +353 (0)1 295 3715 UK Fax: +44 (0)2079 788 141 email: sales@marco.ie...
Page 3
Operating boiler for the first time: Check that all installation procedures have been carried out. Ensure water valve is on. Plug boiler into 13A socket and press power button on the front of the machine marked ‘Power’. Refer to Figure 1. NOTE: On a 5L machine the ‘Power’...
Page 4
Remove as much scale as possible by hand, paying particular attention to level probes (White plastic with steel tab). Be very careful not to damage any attachments. Use ScaleKleen, Marco part No. 8000270 or similar. Follow instructions carefully. Thoroughly clean and flush the machine before re-use.
Page 5
Disconnect the machine from the electrical supply. Allow to cool sufficiently. The metal upper and lower front panels are clipped to the main body. Insert flat headed screwdriver at the four locations indicated on the picture and rotate to seperate the panels. Note:- There is no need to ‘lever’...
Need help?
Do you have a question about the 1000660MJ and is the answer not in the manual?
Questions and answers