Data Collection; Compatible Sensors; Experimental Data - Texas Instruments TI-NSPIRE Software Manual

Data Collection

The Data Collection tool enables you to collect experimental information
from a sensor and automatically display it in a table and/or graph for
analysis. It works with both the Lists & Spreadsheet and Graphs &
Geometry applications. Refer to these application chapters to learn more
about using both Graphs & Geometry and Lists & Spreadsheet.

Compatible sensors

Data Collection is capable of interacting with the following sensors:
• Vernier EasyTemp®
• Texas Instruments CBR2™ Motion Detector
• Vernier Go!®Temp
• Vernier Go!®Motion

Experimental data

The Data Collection tool collects distance or temperature data points at
regular intervals over time. The units of measure, degrees Celsius,
seconds, and meters, cannot be changed.
The table below shows the number of samples and sampling interval for
the sensors currently supported.
Sensor
Vernier EasyTemp®
Texas Instruments
CBR2™ Motion Detector
Vernier Go!®Temp
Vernier Go!®Motion
Data Collection
Number Sampling
of Interval
Samples
180
100 0.05 second
180
100 0.05 second
Test
Duration
1 second 180 seconds
5 seconds
1 second 180 seconds
5 seconds
343