Using Window/Zoom Tools - Texas Instruments TI-NSPIRE Software Manual

Using Window/Zoom tools

Use the Window/Zoom tools
points of interest. The Window/Zoom tools include:
• Window Settings: displays a Window Settings dialog that lets you
enter the x-min, x-max, y-min, and y-max values for the axes.
• Zoom - Data
• Zoom - In
location. The Zoom In factor is approximately 2.
• Zoom - Out
location. The Zoom Out factor is approximately 2.
Using Window Settings
1. Click the Window/Zoom tool
2. The Window Settings dialog opens. The current values for x-min,
x-max, y-min, and y-max display in the fields.
Note: Only the appropriate boxes are editable, depending on
whether there are one or two axes in the work area.
3. Type the new values over the old values.
292
to redefine the graph to better view
: adjusts the zoom factor to display all plotted data.
: lets you to define the center point of the zoom in
: lets you define the center point of the zoom out
, and select Window Settings.
Using Data & Statistics