Using The Bluetooth Function - Panasonic FZ-M1 Series Operating Instructions - Reference Manual

Bluetooth
<Only for model with Bluetooth>
You can access internet and other Bluetooth devices without connecting cables.
N O T E
Communication is established through the Bluetooth antenna (A). Do not block the antenna area with your hand or body.
n
To use Bluetooth, set [Bluetooth]
n
The transmission rate will be lower when a microwave oven is used near by.
n

Using the Bluetooth Function

Before using a Bluetooth, turn the Bluetooth communication on.
Turning on/off the Bluetooth communication
1. To enable the wireless communication (
2. Touch (Settings) - [Network & Internet] - [Airplane mode]
3. To turn off the Bluetooth communications, set "Bluetooth" to [Off].
To turn on the Bluetooth communications, set "Bluetooth" to [On].
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For
example, [Flight mode] may be displayed instead of [Airplane mode] in some language preference.)
To check the Bluetooth communication status
1. Touch
(Settings) - [Devices] - [Bluetooth & other devices].
N O T E
You can also touching
n
the communication status.
of [Wireless Configuration] to [Enabled] (default) in the [Advanced] menu of the Setup Utility.
Disabling/Enabling Wireless
on the task tray, and then touch
Communication).
*1
to [Off].
(Bluetooth Devices) - [Show Bluetooth Devices] to check
- 44 -