Panasonic FZ-M1 Series Operating Instructions - Reference Manual page 8

9. Touch [OK]
Creation of the recovery disc (i.e., writing) starts. Wait a moment for the process to complete.
10. Finish creation of the recovery disc as follows.
For DVD media
1. Remove the disc when "Recovery disc #1 complete." appears, and label the disc to avoid losing it.
Do not use sharp objects that may leave a mark.
2. If the recovery disc spans multiple discs, insert the next disc.
3. Touch [OK].
4. Follow the on-screen instructions to create all the recovery discs.
5. Touch [OK] on the "All recovery discs complete." screen.
For USB storage devices
1. Touch [OK] on the "All recovery discs complete." screen.
2. Perform "Safely Remove Hardware and Eject Media", and remove the USB storage device.
N O T E
The disc created with this utility is only for this computer. You cannot use for others.
n
Additional applications cannot be recovered even if you use a recovery disc created with this utility.
n
If you fail to create a recovery disc or an error message appears, try either of the following procedures.
n
Insert the disc or USB storage device correctly.
Check the disc or USB storage device condition.
Restart the computer and try to create a recovery disc again.
Contact Panasonic Technical Support.
- 8 -