Connecting/Disconnecting The Computer - Panasonic FZ-M1 Series Operating Instructions - Reference Manual

G. Battery charging slot <Only for FZ-VEBM12 series>
Insert the battery packs to charge.
Charging is possible while the battery packs are attached to the computer.
If the battery charging slot gets dust, wipe the dented parts off with such as dry cloth.
H. Charging status indicator <Only for FZ-VEBM12 series>
I. Expansion Bus Connector
This connects to the expansion bus connector on the bottom of the computer.
J. Lever
Use this lever when disconnecting the cradle from the computer.
K. Security Slot (Side)
A Kensington cable can be connected.
If the cable for security is connected to this security slot after the computer is connected, the computer cannot be disconnected because the lever
is locked.
For more information, read the manual that comes with the cable.
L. DC-IN Jack

Connecting/Disconnecting the Computer

Make sure to turn the computer off for connection/disconnection.
n
Do not connect or disconnect the Cradle while the computer is powered on or in the sleep or hibernation mode.
n
Connecting
1. Turn off the computer.
Disconnect all the devices and cables and close the terminal cover.
2. Connect the AC adaptor to DC-IN jack of the Cradle.
Connect the AC cord to the AC adaptor (included or optional), and connect to an AC outlet.
Refer to the "OPERATING INSTRUCTIONS" accompanying computer for information on proper handling of the AC adaptor and AC
cord.
C AU TI O N
- 98 -