Using The Bluetooth Function - Panasonic FZ-G1 Series Operating Instructions - Reference Manual

Bluetooth
<Only for model with Bluetooth>
You can access internet and other Bluetooth devices without connecting cables.
N O T E
Communication is established through the Bluetooth antenna (A). Do not block the antenna area with your hand or

body.
To use Bluetooth, set

Setup Utility.
The transmission rate will be lower when a microwave oven is used near by.

When you uninstall the Bluetooth Driver, turn Bluetooth off.


Using the Bluetooth Function

Before using a Bluetooth, turn the Bluetooth communication on.
Turning on/off the Bluetooth communication
1. Touch (Start) -
*1
to [Off].
Alternativelytouch
*1
[Airplane mode]
To turn off the Bluetooth communication, set [Bluetooth] to [Off].
To turn on the Bluetooth communication, set [Bluetooth] to [On].
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual
screen messages. For example, [Flight mode] may be displayed instead of [Airplane mode] in some language
preference.)
To check the Bluetooth communication status
1. Touch (Start) -
Alternatively, touch
[Bluetooth] of [Wireless Configuration] to [Enabled] (default) in the [Advanced] menu of the
(Settings) - [Network & Internet] - [Airplane mode]
(Notifications) -
to [Off].
(Settings) - [Devices] - [Bluetooth].
(Notifications) on the task tray, and then touch
(All settings) - [Network & Internet] - [Airplane mode]
*1
, and set [Airplane mode]
*1
, and set
(Bluetooth).