Panasonic FZ-M1 Series Operating Instructions - Reference Manual page 67

Embedded Security (TPM)
Only for model that supports TPM.
Can be changed only when [Set Supervisor Password] is set.
Sub-menu items:
Sub-Menu Protection
TPM State (Depending on the models, this item is not displayed.)
Pending TPM operation
When [Clear TPM Owner] is selected, clear owner information in the
TPM chip.
Use for discarding and transferring this product.
If you select [Clear TPM Owner] when the BitLocker is effective, you
may need to reinstall OS.
Current TPM Status Information (Depending on the models, this item is
not displayed.)
<Only for FZ-M1J-series models>
AMT Configuration
Only for model that supports Intel(R) AMT.
Can be changed only when [Set Supervisor Password] is set.
Secure Boot
The sub-menu appears when this item is selected.
If you change factory default setting, preinstalled-OS may not operate correctly.
Exit Menu
Save Values and Reboot
Reboot Without Saving Changes
Save Options
Save Current Values
Load Previous Values
Load Default Values
Boot Override
Windows Boot Manager
Recovery Partition
Windows Recovery Environment
Depending on the hardware constructions, some device names are different.
Diagnostic Utility
Enter the sub-menu.
Enter the sub-menu.
Enter the sub-menu.
To reboot the system after saving the changes.
To reboot the system without saving the changes.
To save the changes for all Setup options.
To load previous values for all Setup options.
To return the settings to the default values.
Boot from preinstalled OS.
Erase your flash memory or restore the computer to its original factory default image.
Boot from Windows Recovery Environment.
Execute Diagnostic Utility.
- 67 -