Table Of Contents - NETGEAR MS108TUP Hardware Installation Manual

Contents
Chapter 1 Introduction
Overview................................................................................................6
Features.................................................................................................6
Safety instructions and warnings........................................................7
Chapter 2 Hardware Overview
Front panel with ports and LEDs......................................................12
LEDs......................................................................................................13
Back panel...........................................................................................14
RJ-45 ports for 100/1000/2.5GBASE-T Ethernet connectivity......14
Multi-function Reset/Factory Defaults button.................................15
Restart (power-cycle) the switch...................................................15
Reset the switch to factory default settings but maintain the
registration status...........................................................................15
Reset the switch to factory default settings and erase the
registration status...........................................................................16
Chapter 3 Applications
PoE++ and PoE+ overview................................................................18
PoE++ and high-speed desktop switching.....................................19
Chapter 4 Installation
Step 1: Prepare the site......................................................................21
Step 2: Protect against electrostatic discharge..............................21
Step 3: Unpack the switch.................................................................22
Step 4: Install the switch....................................................................23
Install the switch on a flat surface.................................................23
Wall-mount the switch horizontally..............................................23
Wall-mount the switch vertically...................................................25
Mount the switch to a pole or another surface..........................25
Step 5: Connect devices to the switch.............................................26
Step 6: Check the installation...........................................................26
Step 7: Apply power and check the LEDs.......................................27
Step 8: Manage the switch................................................................27
3