Installing A Lightning Arrestor - Cisco Catalyst IW9165D Hardware Installation Manual

Installing a Lightning Arrestor

1 Mounting Bracket (for pole or wall)
3 Mounting Bracket (for AP)
5 M8 Bolts (x4)
7 Flat Washer
9 Radial Strap Slots for Pole Mounting
Installing a Lightning Arrestor
Overvoltage transients can be created through lightning static discharges, switch processes, direct contact
with power lines, or through earth currents. The Lightning Arrestor limits the amplitude and duration of
disturbing interference voltages and improves the over voltage resistance of in-line equipment, systems, and
components. A lightning arrestor installed according to these mounting instructions balances the voltage
potential, thus preventing inductive interference to parallel signal lines within the protected system.
Cisco Catalyst IW9165D Heavy Duty Access Point Hardware Installation Guide
24
2 Mounting Slots
4 Pins
6 Split Washer
8 Mounting Holes for Wall Mounting
Installation Overview